TP-Link Archer A7/C7 - Unauthenticated LAN Remote Code ...

Adafruit Space Invader pendant. Want to convert to using a bicolor 1.2 led matrix. How would the code change?

 // Trinket/Gemma + LED matrix backpack jewelry. Plays animated // sequence on LED matrix. Press reset button to display again, // or add optional momentary button between pin #1 and +V. // THERE IS NO ANIMATION DATA IN THIS SOURCE FILE, you should // rarely need to change anything here. EDIT anim.h INSTEAD. #define BRIGHTNESS 14 // 0=min, 15=max #define I2C_ADDR 0x70 // Edit if backpack A0/A1 jumpers set #include  #include  #include  #include "anim2.h" // Animation data is located here #include "anim3.h" // Animation data is located here #include "anim4.h" // Animation data is located here static const uint8_t PROGMEM reorder[] = { // Column-reordering table 0x00,0x40,0x20,0x60,0x10,0x50,0x30,0x70,0x08,0x48,0x28,0x68,0x18,0x58,0x38,0x78, 0x04,0x44,0x24,0x64,0x14,0x54,0x34,0x74,0x0c,0x4c,0x2c,0x6c,0x1c,0x5c,0x3c,0x7c, 0x02,0x42,0x22,0x62,0x12,0x52,0x32,0x72,0x0a,0x4a,0x2a,0x6a,0x1a,0x5a,0x3a,0x7a, 0x06,0x46,0x26,0x66,0x16,0x56,0x36,0x76,0x0e,0x4e,0x2e,0x6e,0x1e,0x5e,0x3e,0x7e, 0x01,0x41,0x21,0x61,0x11,0x51,0x31,0x71,0x09,0x49,0x29,0x69,0x19,0x59,0x39,0x79, 0x05,0x45,0x25,0x65,0x15,0x55,0x35,0x75,0x0d,0x4d,0x2d,0x6d,0x1d,0x5d,0x3d,0x7d, 0x03,0x43,0x23,0x63,0x13,0x53,0x33,0x73,0x0b,0x4b,0x2b,0x6b,0x1b,0x5b,0x3b,0x7b, 0x07,0x47,0x27,0x67,0x17,0x57,0x37,0x77,0x0f,0x4f,0x2f,0x6f,0x1f,0x5f,0x3f,0x7f, 0x80,0xc0,0xa0,0xe0,0x90,0xd0,0xb0,0xf0,0x88,0xc8,0xa8,0xe8,0x98,0xd8,0xb8,0xf8, 0x84,0xc4,0xa4,0xe4,0x94,0xd4,0xb4,0xf4,0x8c,0xcc,0xac,0xec,0x9c,0xdc,0xbc,0xfc, 0x82,0xc2,0xa2,0xe2,0x92,0xd2,0xb2,0xf2,0x8a,0xca,0xaa,0xea,0x9a,0xda,0xba,0xfa, 0x86,0xc6,0xa6,0xe6,0x96,0xd6,0xb6,0xf6,0x8e,0xce,0xae,0xee,0x9e,0xde,0xbe,0xfe, 0x81,0xc1,0xa1,0xe1,0x91,0xd1,0xb1,0xf1,0x89,0xc9,0xa9,0xe9,0x99,0xd9,0xb9,0xf9, 0x85,0xc5,0xa5,0xe5,0x95,0xd5,0xb5,0xf5,0x8d,0xcd,0xad,0xed,0x9d,0xdd,0xbd,0xfd, 0x83,0xc3,0xa3,0xe3,0x93,0xd3,0xb3,0xf3,0x8b,0xcb,0xab,0xeb,0x9b,0xdb,0xbb,0xfb, 0x87,0xc7,0xa7,0xe7,0x97,0xd7,0xb7,0xf7,0x8f,0xcf,0xaf,0xef,0x9f,0xdf,0xbf,0xff }; int animationSection = 0; void ledCmd(uint8_t x) { // Issue command to LED backback driver Wire.beginTransmission(I2C_ADDR); Wire.write(x); Wire.endTransmission(); } void clear(void) { // Clear display buffer Wire.beginTransmission(I2C_ADDR); for(uint8_t i=0; i<17; i++) Wire.write(0); Wire.endTransmission(); } void setup() { power_timer1_disable(); // Disable unused peripherals power_adc_disable(); // to save power PCMSK |= _BV(PCINT1); // Set change mask for pin 1 Wire.begin(); // I2C init clear(); // Blank display ledCmd(0x21); // Turn on oscillator ledCmd(0xE0 | BRIGHTNESS); // Set brightness ledCmd(0x81); // Display on, no blink } uint8_t rep = REPS; void loop() { switch (animationSection) { case 0: for(int i=0; i 10) { animationSection = 0; } if(!--rep) { // If last cycle... ledCmd(0x20); // LED matrix in standby mode // GIMSK = _BV(PCIE); // Enable pin change interrupt // power_all_disable(); // All peripherals off // set_sleep_mode(SLEEP_MODE_PWR_DOWN); // sleep_enable(); // sei(); // Keep interrupts disabled // sleep_mode(); // Power down CPU (pin 1 will wake) // Execution resumes here on wake. // PLD - Simply Sleep for 2 minutes then start again... //delay(100000); //delay(100000); delay(120000); animationSection = 0; GIMSK = 0; // Disable pin change interrupt rep = REPS; // Reset animation counter power_timer0_enable(); // Re-enable timer power_usi_enable(); // Re-enable USI Wire.begin(); // Re-init I2C clear(); // Blank display ledCmd(0x21); // Re-enable matrix } } ISR(PCINT0_vect) {} // Button tap 
This is a section of the anim file. I want to be able to set the various colors in these "frames"
// Animation data for Trinket/Gemma + LED matrix backpack jewelry. // Edit this file to change the animation; it's unlikely you'll need // to edit the source code. #define REPS 10 // Number of times to repeat the animation loop (1-255) const int frameSpeed2 = 3; const uint8_t PROGMEM anim2[] = { // Animation bitmaps. Each frame of animation MUST contain // 8 lines of graphics data (there is no error checking for // length). Each line should be prefixed with the letter 'B', // followed by exactly 8 binary digits (0 or 1), no more, // no less (again, no error checking). '0' represents an // 'off' pixel, '1' an 'on' pixel. End line with a comma. B00000000, B00000000, B00000000, B00000000, B00000000, B00000000, B00000000, B00000000, frameSpeed2, // 0.10 seconds }; 
submitted by pldiguanaman to arduino [link] [comments]

TP-Link Archer A7/C7 - Unauthenticated LAN Remote Code Execution (Metasploit). CVE-2020-10884CVE-2020-10883CVE-2020-10882 . remote exploit for Linux_MIPS platform Sunday, 16 June 2019. 0xdd binary options 0xdd Binary Options July 14, 2017 Binary options banners for cheap / Equity investment corp; Climatempo luzerne schuylkill workforce investment board inc / Trade binary options; E trailing2; Best site binary options; Lending definition investopedia Forex; Binary trader robot; Ak investment v hyrgyz province / X3 terran conflict chimera investment; Investing in gold and silver mike maloney ; Chengdu investment holding llc / Iq ... Sunday, 8 July 2018. 0xdd binary options 0xdd Binary Options Ich muss die Hex-Zahlen aus diesem Byte-Array zu nehmen und wandeln sie in binäre und dann alle binären in eine einzelne Zeichenfolge. A aber aufgrund der Tatsache, wie ich die Zeichenfolge initialisiert (mein erster Versuch) meine Ausgabe hatte null in ihm. Irgendwelche Ideen, wie zu beheben, dass Auch ich nur geändert, um anfügen, wie zur Behebung des Problems hatte ... Billig Bad Sachsa (lower Saxony): 0xdd Binary Optionen, kostenloses forex handelskonto, binary option menurut hukum islam - trading option menurut islam, beste binaire software 2020 The list below describes each of the Compiler options and its default setting, when applicable. -# Provides information on how the Compiler and linker would be invoked without actually invoking them. This option also shows which UNIX options are translated to Micro Focus options; for example, when the standard UNIX -O option is given on the driver command line, it is translated on the Compiler ... [EXEC preprocessor options] ... [Use float binary as float decimal] 浮動バイナリを浮動小数として使用するかどうかを制御します。 ... 文字、10 進数、または 0xDD 形式の 16 進定数を使用できます。例: -currency_symbol £ -currency_symbol 163 -currency_symbol 0xa3 [Specify margins] 余白を指定します (-margins left, right)。 [Additional NLS ... Saturday, 4 November 2017. 0xdd Binary Optiot

[index] [125] [11024] [3403] [10617] [2220] [21747] [17714] [29313] [21844] [654]

http://binaryoptiontrade.duncrotunutchartdon.gq